Quick navigation
|
标准装置 Standard Accessories |
|
电动黄油润滑装置 Electrical drive lubrication system |
|
液压过载?；ぷ爸?/span> Hydraulic over-load protector |
|
手动式滑块调整装置 Manual slide adjust device |
|
主电机 Main motor |
|
变频器Transducer |
|
机械式曲轴角度指示器 Crank angle counter |
|
机械式模高指示器 Die height indicator |
|
滑块及模具平衡装置 Balance device |
|
凸轮控制器或旋转编码器 Cam controller or rotary encoder |
|
模具照明灯 Working light 二度落保护装置 Against over-run safety device 触摸屏系统 Touch screen 可编程控器系统 PLC 固定双手按钮操作站 Two-handed operation station |
|
误送检知接口 Mis-feeder check-out port |
|
空气源接头 Compressed air connector |
|
空气吹料接头 Set blowing connector |
|
主电机逆转装置 Main motor reversing device |
|
组合式干式摩擦离合器 Combined dry friction clutch |
|
防震垫脚 Adjusting shockproof pad |
|
选择配置 Optional Accessories |
|
可移动双手操作按钮站 Mobile two-handed operation station |
|
脚踏开关 Foot switch |
|
刚性上打料装置 Downward rigid ejector |
|
光电安全?；ぷ爸?/span> Raster protector |
|
气垫 Air cushion |
|
吨位显示仪 Tonnage indicator |
|
组合式湿式离合器 Combined wet lunch |
|
快速换模装置 Quick mold change device |
|
自动化外围设备 Automatic supporting equipment
|
| 规格 Specification | HDA-25A | HDA-35A | HDA-45A | HDA-60A |
| T型槽 | Ⅰ | Ⅰ | Ⅰ | Ⅱ |
| A×B | 240×120 | 280×140 | 300×150 | 320×160 |
| C×D | 680×300 | 800×400 | 850×440 | 900×500 |
| E | 90 | 120 | 120 | 150 |
| F | — | — | — | 110 |
| G | 40 | 50 | 60 | 80 |
| 模柄孔径 | φ38 | φ38 | φ38 | φ50 |
| 标准(L×M) | 300×230 | 360×250 | 400×300 | 500×360 |
| 饱满(L×M) | 470×230 | 520×250 | 560×300 | 700×360 |
