Quick navigation
|
标准装置 Standard Accessories |
|
电动黄油润滑装置 Electrical drive lubrication system |
|
液压过载?；ぷ爸?/span> Hydraulic over-load protector |
|
电动式滑块调整装置 Automatic slide adjust device |
|
主电机 Main motor
|
|
变频器Transducer |
|
机械式曲轴角度指示器 Crank angle counter（80T-200T） |
|
装模高度显示器 Die height indicator |
|
滑块及模具平衡装置 Balance device |
|
凸轮控制器或旋转编码器 Cam controller or rotary encoder |
|
模具照明灯 Working light 二度落?；ぷ爸?/span> Against over-run safety device 触摸屏系统 Touch screen 可编程控器系统 PLC 固定双手按钮操作站 Two-handed operation station |
|
误送检知接口 Mis-feeder check-out port |
|
空气源接头 Compressed air connector |
|
空气吹料接头 Set blowing connector |
|
主电机逆转装置 Main motor reversing device |
|
组合式干式摩擦离合器 Combined dry friction clutch |
|
防震垫脚 Adjusting shockproof pad |
|
选择配置 Optional Accessories |
|
可移动双手操作按钮站 Mobile two-handed operation station |
|
脚踏开关 Foot switch |
|
刚性上打料装置 Downward rigid ejector |
|
光电安全?；ぷ爸?/span> Raster protector |
|
气垫 Air cushion |
|
吨位显示仪 Tonnage indicator |
|
组合式湿式离合器 Combined wet lunch |
|
快速换模装置 Quick mold change device |
|
自动化外围设备 Automatic supporting equipment |
|
选择配置 Optional Accessories |
|
可移动双手操作按钮站 Mobile two-handed operation station |
|
脚踏开关 Foot switch |
|
刚性上打料装置 Downward rigid ejector |
|
光电安全?；ぷ爸?/span> Raster protector |
|
气垫 Air cushion |
|
吨位显示仪 Tonnage indicator |
|
组合式湿式离合器 Combined wet lunch |
|
快速换模装置 Quick mold change device |
|
自动化外围设备 Automatic supporting equipment
|
| 规格 Specification | HDA-80A | HDA-110A | HDA-160A | HDA-200A | HDA-250A | HDA-315A |
| A×B | 360×180 | 400×200 | 440×220 | Φ300圆孔 | Φ300圆孔 | Φ200圆孔 |
| C×D | 1000×550 | 1150×600 | 1250×800 | 1400×820 | 1400×830 | 1500×840 |
| E | 150 | 160 | 220 | 280 | 290 | 290 |
| F | 150 | 150 | 150 | 210 | 210 | 210 |
| G | 90 | 110 | 110 | 150 | 150 | 150 |
| 模柄孔径 | φ50 | φ50 | φ65 | φ65 | φ65 | φ65 |
| 标准(L×M) | 560×420 | 650×470 | 700×550 | 850×630 | 850×650 | 950×700 |
| 饱满(L×M) | 770×420 | 910×470 | 990×550 | 1030×630 | / | / |
